Welcome to Forex-TSD!, one of the largest Forex forums worldwide, where you will be able to find the most complete and reliable Forex information imaginable.
From the list below, select the forum that you want to visit and register to post, as many times you want. It’s absolutely free. Click here for registering on Forex-TSD.
Exclusive Forum
The Exclusive Forum is the only paid section. Once you subscribe, you will get free access to real cutting-edge Trading Systems (automated and not), Indicators, Signals, Articles, etc., that will help and guide you, in ways that you could only imagine, with your Forex trading.
Elite Section
Get access to private discussions, specialized support, indicators and trading systems reported every week.
Advanced Elite Section
For professional traders, trading system developers and any other member who may need to use and/or convert, the most cutting-edge exclusive indicators and trading systems for MT4 and MT5.
who can convert from Tradestation to metatrader here is the code:
TradeStation code for Gartley 222 pattern found in "Trading the Gartley 222" by Aaron Behle and Mark Conway, p. 38:
Code:
Inputs:
Length(100),
Strength(8),
Tolerance(0.10),
BullColor(Blue),
BearColor(Red);
Variables:
F1(0.618),
F2(0.786),
F3(1.27),
F4(1.618),
P1Bar(-1),
P2Bar(-1),
T1Bar(-1),
T2Bar(-1),
P1(0.0),
P2(0.0),
T1(0.0),
T2(0.0),
PTValid(False),
HLValid(False),
InZone(False),
GD(0.0),
XA(0.0),
AB(0.0),
BC(0.0),
CD(0.0),
AD(0.0),
C1(False),
C2(False),
C3(False),
C4(False),
ABdXA(0.0),
BCdAB(0.0),
CDdBC(0.0),
ADdXA(0.0),
TL1(-1),
TL2(-1),
TL3(-1),
TL4(-1),
TL5(-1),
TL6(-1);
P1Bar = SwingHighBar(1, High, Strength, Length);
P2Bar = SwingHighBar(2, High, Strength, Length);
T1Bar = SwingLowBar(1, Low, Strength, Length);
T2Bar = SwingLowBar(2, Low, Strength, Length);
If P1Bar <> -1 and
P2Bar <> -1 and
T1Bar <> -1 and
T2Bar <> -1 Then Begin
{Test for a bullish 222}
{Trough X is T2}
T2 = Low[T2Bar];
{Peak A is P2}
P2 = High[P2Bar];
{Trough B is T1}
T1 = Low[T1Bar];
{Peak C is P1}
P1 = High[P1Bar];
{D is the buy point}
GD = Low;
PTValid = P1Bar < T1Bar and T1Bar < P2Bar and P2Bar < T2Bar;
HLValid = P1 < P2 and T1 > T2 and P1 > T1;
InZone = GD < T1 and GD > T2 and P2 >= Highest(High, T2Bar);
If PTValid and HLValid and InZone Then Begin
XA = P2 - T2;
AB = P2 - T1;
BC = P1 - T1;
CD = P1 - GD;
AD = P2 - GD;
ABdXA = AB / XA; {AB should be 61.8% of XA}
C1 = ABdXA > F1 - Tolerance and ABdXA < F1 + Tolerance;
BCdAB = BC / AB; {BC should be 61.8-78.6% of AB}
C2 = BCdAB > F1 - Tolerance and BCdAB < F2 + Tolerance;
CDdBC = CD / BC; {CD should be 127-161.8% of BC}
C3 = CDdBC > F3 - Tolerance and CDdBC < F4 + Tolerance;
ADdXA = AD / XA; {AD should be 78.6% of XA}
C4 = ADdXA > F2 - Tolerance and ADdXA < F2 + Tolerance;
If C1 and C2 and C3 and C4 Then Begin
TL1 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date[P2Bar], Time[P2Bar], P2);
If TL1 >= 0 Then Begin
TL_SetColor(TL1, BullColor);
TL_SetStyle(TL1, Tool_Solid);
TL_SetSize(TL1, 2);
End;
TL2 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date[T1Bar], Time[T1Bar], T1);
If TL2 >= 0 Then Begin
TL_SetColor(TL2, BullColor);
TL_SetStyle(TL2, Tool_Solid);
TL_SetSize(TL2, 2);
End;
TL3 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date[P1Bar], Time[P1Bar], P1);
If TL3 >= 0 Then Begin
TL_SetColor(TL3, BullColor);
TL_SetStyle(TL3, Tool_Solid);
TL_SetSize(TL3, 2);
End;
TL4 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date, Time, GD);
If TL4 >= 0 Then Begin
TL_SetColor(TL4, BullColor);
TL_SetStyle(TL4, Tool_Solid);
TL_SetSize(TL4, 2);
End;
TL5 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date, Time, GD);
If TL5 >= 0 Then Begin
TL_SetColor(TL5, BullColor);
TL_SetStyle(TL5, Tool_Dotted);
End;
TL6 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date, Time, GD);
If TL6 >= 0 Then Begin
TL_SetColor(TL6, BullColor);
TL_SetStyle(TL6, Tool_Dotted);
End;
End;
End;
{Test for a bearish 222}
{Peak X is P2}
{Trough A is T2}
{Peak B is P1}
{Trough C is T1}
{GD is the short point}
GD = High;
PTValid = T1Bar < P1Bar and P1Bar < T2Bar and T2Bar < P2Bar;
HLValid = T1 > T2 and P1 < P2 and T1 < P1;
InZone = GD > P1 and GD < P2 and T2 <= Lowest(Low, P2Bar);
If PTValid and HLValid and InZone Then Begin
XA = P2 - T2;
AB = P1 - T2;
BC = P1 - T1;
CD = GD - T1;
AD = GD - T2;
ABdXA = AB / XA; {AB should be 61.8% of XA}
C1 = ABdXA > F1 - Tolerance and ABdXA < F1 + Tolerance;
BCdAB = BC / AB; {BC should be 61.8-78.6% of AB}
C2 = BCdAB > F1 - Tolerance and BCdAB < F2 + Tolerance;
CDdBC = CD / BC; {CD should be 127-161.8% of BC}
C3 = CDdBC > F3 - Tolerance and CDdBC < F4 + Tolerance;
ADdXA = AD / XA; {AD should be 78.6% of XA}
C4 = ADdXA > F2 - Tolerance and ADdXA < F2 + Tolerance;
If C1 and C2 and C3 and C4 Then Begin
TL1 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date[T2Bar], Time[T2Bar], T2);
If TL1 >= 0 Then Begin
TL_SetColor(TL1, BearColor);
TL_SetStyle(TL1, Tool_Solid);
TL_SetSize(TL1, 2);
End;
TL2 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date[P1Bar], Time[P1Bar], P1);
If TL2 >= 0 Then Begin
TL_SetColor(TL2, BearColor);
TL_SetStyle(TL2, Tool_Solid);
TL_SetSize(TL2, 2);
End;
TL3 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date[T1Bar], Time[T1Bar], T1);
If TL3 >= 0 Then Begin
TL_SetColor(TL3, BearColor);
TL_SetStyle(TL3, Tool_Solid);
TL_SetSize(TL3, 2);
End;
TL4 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date, Time, GD);
If TL4 >= 0 Then Begin
TL_SetColor(TL4, BearColor);
TL_SetStyle(TL4, Tool_Solid);
TL_SetSize(TL4, 2);
End;
TL5 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date, Time, GD);
If TL5 >= 0 Then Begin
TL_SetColor(TL5, BearColor);
TL_SetStyle(TL5, Tool_Dotted);
End;
TL6 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date, Time, GD);
If TL6 >= 0 Then Begin
TL_SetColor(TL6, BearColor);
TL_SetStyle(TL6, Tool_Dotted);
End;
End;
End;
End;
Or from Wealth-Lab code to metatrader4:
Code:
procedure Gartley222
(
VPFactor: float;
Tolerance: float;
Lookback: integer;
HoldBars: integer;
VolMin: integer
);
begin
var ATRValue, VP, Reversal: float;
var F1, F2, F3, F4, P1, P2, T1, T2: float;
var Bar, P1Bar, P2Bar, T1Bar, T2Bar, p: integer;
var XA, AB, BC, CD, AD, D, XD, DT, ABdXA, BCdAB, CDdBC, ADdXA: float;
var PTValid, HLValid, InZone, C1, C2, C3, C4: boolean;
var BT, BS, ST, SS: float;
{Fibonacci Constants}
F1 := 0.618;
F2 := 0.786;
F3 := 1.27;
F4 := 1.618;
InstallTimeBasedExit(HoldBars);
for Bar := Lookback to BarCount() - 1 do
begin
ApplyAutoStops(Bar);
ATRValue := ATR(Bar, Lookback);
SetShareSize( 1000 * Int( 10 / ATRValue ) );
VP := 100 * ATRValue / PriceClose(Bar);
{Find peaks and troughs}
Reversal := Int(VPFactor * VP);
P1 := Peak(Bar, #High, F1 * Reversal);
P1Bar := PeakBar(Bar, #High, F1 * Reversal);
P2 := Peak(P1Bar, #High, Reversal);
P2Bar := PeakBar(P1Bar, #High, Reversal);
T1 := Trough(Bar, #Low, F1 * Reversal);
T1Bar := TroughBar(Bar, #Low, F1 * Reversal);
T2 := Trough(T1Bar, #Low, Reversal);
T2Bar := TroughBar(T1Bar, #Low, Reversal);
{Test for a bullish 222}
{Trough X is T2}
{Peak A is P2}
{Trough B is T1}
{Peak C is P1}
{D is the buy zone}
D := PriceLow(Bar);
PTValid := (P1Bar > T1Bar) and (T1Bar > P2Bar) and (P2Bar > T2Bar);
HLValid := (P1 < P2) and (T1 > T2) and (P1 > T1);
InZone := (D < T1) and (D > T2);
if (MarketPosition = 0) and
(SMA(Bar, #Volume, Lookback) >= VolMin) and
(PTValid) and (HLValid) and (InZone) then
begin
XA := P2 - T2;
AB := P2 - T1;
BC := P1 - T1;
XD := P2 - (F2 * XA);
CD := P1 - XD;
AD := P2 - XD;
ABdXA := AB / XA; {AB should be 61.8% of XA}
C1 := (ABdXA > F1 - Tolerance) and (ABdXA < F1 + Tolerance);
BCdAB := BC / AB; {BC should be 61.8-78.6% of AB}
C2 := (BCdAB > F1 - Tolerance) and (BCdAB < F2 + Tolerance);
CDdBC := CD / BC; {CD should be 127-161.8% of BC}
C3 := (CDdBC > F3 - Tolerance) and (CDdBC < F4 + Tolerance);
ADdXA := AD / XA; {AD should be 78.6% of XA}
C4 := (ADdXA > F2 - Tolerance) and (ADdXA < F2 + Tolerance);
if C1 and C2 and C3 and C4 then
begin
DrawLine(P2Bar, P2, T2Bar, T2, 0, #Blue, #Solid);
DrawLine(T1Bar, T1, P2Bar, P2, 0, #Blue, #Solid);
DrawLine(P1Bar, P1, T1Bar, T1, 0, #Blue, #Solid);
DrawLine(Bar, D, P1Bar, P1, 0, #Blue, #Solid);
DrawLine(Bar, D, T1Bar, T1, 0, #Blue, #Dotted);
DrawLine(Bar, D, T2Bar, T2, 0, #Blue, #Dotted);
AnnotateBar('B', Bar, True, #Blue, 10);
BuyAtLimit(Bar, XD, 'G222 LE');
DT := F1 * CD;
BT := XD + DT;
BS := T2;
end;
end;
{Test for a bearish 222}
{Peak X is P2}
{Trough A is T2}
{Peak B is P1}
{Trough C is T1}
{D is the short zone}
D := PriceHigh(Bar);
PTValid := (T1Bar > P1Bar) and (P1Bar > T2Bar) and (T2Bar > P2Bar);
HLValid := (T1 > T2) and (P1 < P2) and (T1 < P1);
InZone := (D > P1) and (D < P2);
if (MarketPosition = 0) and
(PriceClose( Bar ) >= 5) and
(SMA(Bar, #Volume, Lookback) >= VolMin) and
(PTValid) and (HLValid) and (InZone) then
begin
XA := P2 - T2;
AB := P1 - T2;
BC := P1 - T1;
XD := T2 + (F2 * XA);
CD := XD - T1;
AD := XD - T2;
ABdXA := AB / XA; {AB should be 61.8% of XA}
C1 := (ABdXA > F1 - Tolerance) and (ABdXA < F1 + Tolerance);
BCdAB := BC / AB; {BC should be 61.8-78.6% of AB}
C2 := (BCdAB > F1 - Tolerance) and (BCdAB < F2 + Tolerance);
CDdBC := CD / BC; {CD should be 127-161.8% of BC}
C3 := (CDdBC > F3 - Tolerance) and (CDdBC < F4 + Tolerance);
ADdXA := AD / XA; {AD should be 78.6% of XA}
C4 := (ADdXA > F2 - Tolerance) and (ADdXA < F2 + Tolerance);
if C1 and C2 and C3 and C4 then
begin
DrawLine(T2Bar, T2, P2Bar, P2, 0, #Red, #Solid);
DrawLine(P1Bar, P1, T2Bar, T2, 0, #Red, #Solid);
DrawLine(T1Bar, T1, P1Bar, P1, 0, #Red, #Solid);
DrawLine(Bar, D, T1Bar, T1, 0, #Red, #Solid);
DrawLine(Bar, D, P1Bar, P1, 0, #Red, #Dotted);
DrawLine(Bar, D, P2Bar, P2, 0, #Red, #Dotted);
AnnotateBar('S', Bar, False, #Red, 10);
ShortAtLimit(Bar, XD, 'G222 SE');
DT := F1 * CD;
ST := XD - DT;
SS := P2;
end;
end;
if LastPositionActive then
begin
if MarketPosition = 1 then begin
SellAtLimit(Bar+1, BT, #All, 'G222 LX+');
SellAtStop(Bar+1, BS, #All, 'G222 LX-');
end;
if MarketPosition = -1 then begin
CoverAtLimit(Bar+1, ST, #All, 'G222 LX+');
CoverAtStop(Bar+1, SS, #All, 'G222 LX-');
end;
end;
end;
end;
Gartley222(2.0, 0.1, 20, 7, 2000000);
who can convert from Tradestation to metatrader here is the code:
TradeStation code for Gartley 222 pattern found in "Trading the Gartley 222" by Aaron Behle and Mark Conway, p. 38:
Code:
Inputs:
Length(100),
Strength(8),
Tolerance(0.10),
BullColor(Blue),
BearColor(Red);
Variables:
F1(0.618),
F2(0.786),
F3(1.27),
F4(1.618),
P1Bar(-1),
P2Bar(-1),
T1Bar(-1),
T2Bar(-1),
P1(0.0),
P2(0.0),
T1(0.0),
T2(0.0),
PTValid(False),
HLValid(False),
InZone(False),
GD(0.0),
XA(0.0),
AB(0.0),
BC(0.0),
CD(0.0),
AD(0.0),
C1(False),
C2(False),
C3(False),
C4(False),
ABdXA(0.0),
BCdAB(0.0),
CDdBC(0.0),
ADdXA(0.0),
TL1(-1),
TL2(-1),
TL3(-1),
TL4(-1),
TL5(-1),
TL6(-1);
P1Bar = SwingHighBar(1, High, Strength, Length);
P2Bar = SwingHighBar(2, High, Strength, Length);
T1Bar = SwingLowBar(1, Low, Strength, Length);
T2Bar = SwingLowBar(2, Low, Strength, Length);
If P1Bar <> -1 and
P2Bar <> -1 and
T1Bar <> -1 and
T2Bar <> -1 Then Begin
{Test for a bullish 222}
{Trough X is T2}
T2 = Low[T2Bar];
{Peak A is P2}
P2 = High[P2Bar];
{Trough B is T1}
T1 = Low[T1Bar];
{Peak C is P1}
P1 = High[P1Bar];
{D is the buy point}
GD = Low;
PTValid = P1Bar < T1Bar and T1Bar < P2Bar and P2Bar < T2Bar;
HLValid = P1 < P2 and T1 > T2 and P1 > T1;
InZone = GD < T1 and GD > T2 and P2 >= Highest(High, T2Bar);
If PTValid and HLValid and InZone Then Begin
XA = P2 - T2;
AB = P2 - T1;
BC = P1 - T1;
CD = P1 - GD;
AD = P2 - GD;
ABdXA = AB / XA; {AB should be 61.8% of XA}
C1 = ABdXA > F1 - Tolerance and ABdXA < F1 + Tolerance;
BCdAB = BC / AB; {BC should be 61.8-78.6% of AB}
C2 = BCdAB > F1 - Tolerance and BCdAB < F2 + Tolerance;
CDdBC = CD / BC; {CD should be 127-161.8% of BC}
C3 = CDdBC > F3 - Tolerance and CDdBC < F4 + Tolerance;
ADdXA = AD / XA; {AD should be 78.6% of XA}
C4 = ADdXA > F2 - Tolerance and ADdXA < F2 + Tolerance;
If C1 and C2 and C3 and C4 Then Begin
TL1 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date[P2Bar], Time[P2Bar], P2);
If TL1 >= 0 Then Begin
TL_SetColor(TL1, BullColor);
TL_SetStyle(TL1, Tool_Solid);
TL_SetSize(TL1, 2);
End;
TL2 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date[T1Bar], Time[T1Bar], T1);
If TL2 >= 0 Then Begin
TL_SetColor(TL2, BullColor);
TL_SetStyle(TL2, Tool_Solid);
TL_SetSize(TL2, 2);
End;
TL3 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date[P1Bar], Time[P1Bar], P1);
If TL3 >= 0 Then Begin
TL_SetColor(TL3, BullColor);
TL_SetStyle(TL3, Tool_Solid);
TL_SetSize(TL3, 2);
End;
TL4 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date, Time, GD);
If TL4 >= 0 Then Begin
TL_SetColor(TL4, BullColor);
TL_SetStyle(TL4, Tool_Solid);
TL_SetSize(TL4, 2);
End;
TL5 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date, Time, GD);
If TL5 >= 0 Then Begin
TL_SetColor(TL5, BullColor);
TL_SetStyle(TL5, Tool_Dotted);
End;
TL6 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date, Time, GD);
If TL6 >= 0 Then Begin
TL_SetColor(TL6, BullColor);
TL_SetStyle(TL6, Tool_Dotted);
End;
End;
End;
{Test for a bearish 222}
{Peak X is P2}
{Trough A is T2}
{Peak B is P1}
{Trough C is T1}
{GD is the short point}
GD = High;
PTValid = T1Bar < P1Bar and P1Bar < T2Bar and T2Bar < P2Bar;
HLValid = T1 > T2 and P1 < P2 and T1 < P1;
InZone = GD > P1 and GD < P2 and T2 <= Lowest(Low, P2Bar);
If PTValid and HLValid and InZone Then Begin
XA = P2 - T2;
AB = P1 - T2;
BC = P1 - T1;
CD = GD - T1;
AD = GD - T2;
ABdXA = AB / XA; {AB should be 61.8% of XA}
C1 = ABdXA > F1 - Tolerance and ABdXA < F1 + Tolerance;
BCdAB = BC / AB; {BC should be 61.8-78.6% of AB}
C2 = BCdAB > F1 - Tolerance and BCdAB < F2 + Tolerance;
CDdBC = CD / BC; {CD should be 127-161.8% of BC}
C3 = CDdBC > F3 - Tolerance and CDdBC < F4 + Tolerance;
ADdXA = AD / XA; {AD should be 78.6% of XA}
C4 = ADdXA > F2 - Tolerance and ADdXA < F2 + Tolerance;
If C1 and C2 and C3 and C4 Then Begin
TL1 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date[T2Bar], Time[T2Bar], T2);
If TL1 >= 0 Then Begin
TL_SetColor(TL1, BearColor);
TL_SetStyle(TL1, Tool_Solid);
TL_SetSize(TL1, 2);
End;
TL2 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date[P1Bar], Time[P1Bar], P1);
If TL2 >= 0 Then Begin
TL_SetColor(TL2, BearColor);
TL_SetStyle(TL2, Tool_Solid);
TL_SetSize(TL2, 2);
End;
TL3 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date[T1Bar], Time[T1Bar], T1);
If TL3 >= 0 Then Begin
TL_SetColor(TL3, BearColor);
TL_SetStyle(TL3, Tool_Solid);
TL_SetSize(TL3, 2);
End;
TL4 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date, Time, GD);
If TL4 >= 0 Then Begin
TL_SetColor(TL4, BearColor);
TL_SetStyle(TL4, Tool_Solid);
TL_SetSize(TL4, 2);
End;
TL5 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date, Time, GD);
If TL5 >= 0 Then Begin
TL_SetColor(TL5, BearColor);
TL_SetStyle(TL5, Tool_Dotted);
End;
TL6 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date, Time, GD);
If TL6 >= 0 Then Begin
TL_SetColor(TL6, BearColor);
TL_SetStyle(TL6, Tool_Dotted);
End;
End;
End;
End;
Or from Wealth-Lab code to metatrader4:
Code:
procedure Gartley222
(
VPFactor: float;
Tolerance: float;
Lookback: integer;
HoldBars: integer;
VolMin: integer
);
begin
var ATRValue, VP, Reversal: float;
var F1, F2, F3, F4, P1, P2, T1, T2: float;
var Bar, P1Bar, P2Bar, T1Bar, T2Bar, p: integer;
var XA, AB, BC, CD, AD, D, XD, DT, ABdXA, BCdAB, CDdBC, ADdXA: float;
var PTValid, HLValid, InZone, C1, C2, C3, C4: boolean;
var BT, BS, ST, SS: float;
{Fibonacci Constants}
F1 := 0.618;
F2 := 0.786;
F3 := 1.27;
F4 := 1.618;
InstallTimeBasedExit(HoldBars);
for Bar := Lookback to BarCount() - 1 do
begin
ApplyAutoStops(Bar);
ATRValue := ATR(Bar, Lookback);
SetShareSize( 1000 * Int( 10 / ATRValue ) );
VP := 100 * ATRValue / PriceClose(Bar);
{Find peaks and troughs}
Reversal := Int(VPFactor * VP);
P1 := Peak(Bar, #High, F1 * Reversal);
P1Bar := PeakBar(Bar, #High, F1 * Reversal);
P2 := Peak(P1Bar, #High, Reversal);
P2Bar := PeakBar(P1Bar, #High, Reversal);
T1 := Trough(Bar, #Low, F1 * Reversal);
T1Bar := TroughBar(Bar, #Low, F1 * Reversal);
T2 := Trough(T1Bar, #Low, Reversal);
T2Bar := TroughBar(T1Bar, #Low, Reversal);
{Test for a bullish 222}
{Trough X is T2}
{Peak A is P2}
{Trough B is T1}
{Peak C is P1}
{D is the buy zone}
D := PriceLow(Bar);
PTValid := (P1Bar > T1Bar) and (T1Bar > P2Bar) and (P2Bar > T2Bar);
HLValid := (P1 < P2) and (T1 > T2) and (P1 > T1);
InZone := (D < T1) and (D > T2);
if (MarketPosition = 0) and
(SMA(Bar, #Volume, Lookback) >= VolMin) and
(PTValid) and (HLValid) and (InZone) then
begin
XA := P2 - T2;
AB := P2 - T1;
BC := P1 - T1;
XD := P2 - (F2 * XA);
CD := P1 - XD;
AD := P2 - XD;
ABdXA := AB / XA; {AB should be 61.8% of XA}
C1 := (ABdXA > F1 - Tolerance) and (ABdXA < F1 + Tolerance);
BCdAB := BC / AB; {BC should be 61.8-78.6% of AB}
C2 := (BCdAB > F1 - Tolerance) and (BCdAB < F2 + Tolerance);
CDdBC := CD / BC; {CD should be 127-161.8% of BC}
C3 := (CDdBC > F3 - Tolerance) and (CDdBC < F4 + Tolerance);
ADdXA := AD / XA; {AD should be 78.6% of XA}
C4 := (ADdXA > F2 - Tolerance) and (ADdXA < F2 + Tolerance);
if C1 and C2 and C3 and C4 then
begin
DrawLine(P2Bar, P2, T2Bar, T2, 0, #Blue, #Solid);
DrawLine(T1Bar, T1, P2Bar, P2, 0, #Blue, #Solid);
DrawLine(P1Bar, P1, T1Bar, T1, 0, #Blue, #Solid);
DrawLine(Bar, D, P1Bar, P1, 0, #Blue, #Solid);
DrawLine(Bar, D, T1Bar, T1, 0, #Blue, #Dotted);
DrawLine(Bar, D, T2Bar, T2, 0, #Blue, #Dotted);
AnnotateBar('B', Bar, True, #Blue, 10);
BuyAtLimit(Bar, XD, 'G222 LE');
DT := F1 * CD;
BT := XD + DT;
BS := T2;
end;
end;
{Test for a bearish 222}
{Peak X is P2}
{Trough A is T2}
{Peak B is P1}
{Trough C is T1}
{D is the short zone}
D := PriceHigh(Bar);
PTValid := (T1Bar > P1Bar) and (P1Bar > T2Bar) and (T2Bar > P2Bar);
HLValid := (T1 > T2) and (P1 < P2) and (T1 < P1);
InZone := (D > P1) and (D < P2);
if (MarketPosition = 0) and
(PriceClose( Bar ) >= 5) and
(SMA(Bar, #Volume, Lookback) >= VolMin) and
(PTValid) and (HLValid) and (InZone) then
begin
XA := P2 - T2;
AB := P1 - T2;
BC := P1 - T1;
XD := T2 + (F2 * XA);
CD := XD - T1;
AD := XD - T2;
ABdXA := AB / XA; {AB should be 61.8% of XA}
C1 := (ABdXA > F1 - Tolerance) and (ABdXA < F1 + Tolerance);
BCdAB := BC / AB; {BC should be 61.8-78.6% of AB}
C2 := (BCdAB > F1 - Tolerance) and (BCdAB < F2 + Tolerance);
CDdBC := CD / BC; {CD should be 127-161.8% of BC}
C3 := (CDdBC > F3 - Tolerance) and (CDdBC < F4 + Tolerance);
ADdXA := AD / XA; {AD should be 78.6% of XA}
C4 := (ADdXA > F2 - Tolerance) and (ADdXA < F2 + Tolerance);
if C1 and C2 and C3 and C4 then
begin
DrawLine(T2Bar, T2, P2Bar, P2, 0, #Red, #Solid);
DrawLine(P1Bar, P1, T2Bar, T2, 0, #Red, #Solid);
DrawLine(T1Bar, T1, P1Bar, P1, 0, #Red, #Solid);
DrawLine(Bar, D, T1Bar, T1, 0, #Red, #Solid);
DrawLine(Bar, D, P1Bar, P1, 0, #Red, #Dotted);
DrawLine(Bar, D, P2Bar, P2, 0, #Red, #Dotted);
AnnotateBar('S', Bar, False, #Red, 10);
ShortAtLimit(Bar, XD, 'G222 SE');
DT := F1 * CD;
ST := XD - DT;
SS := P2;
end;
end;
if LastPositionActive then
begin
if MarketPosition = 1 then begin
SellAtLimit(Bar+1, BT, #All, 'G222 LX+');
SellAtStop(Bar+1, BS, #All, 'G222 LX-');
end;
if MarketPosition = -1 then begin
CoverAtLimit(Bar+1, ST, #All, 'G222 LX+');
CoverAtStop(Bar+1, SS, #All, 'G222 LX-');
end;
end;
end;
end;
Gartley222(2.0, 0.1, 20, 7, 2000000);
hmm they should have provided Metatrader code too somebody must have this indicator so anybody having this indicator can share?
i know everything is possible given the platform provides the development environment such as MT4 i am not a good programmer but i will try to create something out of this code thank you for sharing
i know there are some great programmers here if some one can convert this would be helpful for learning and trading
i know everything is possible given the platform provides the development environment such as MT4 i am not a good programmer but i will try to create something out of this code thank you for sharing
i know there are some great programmers here if some one can convert this would be helpful for learning and trading
Hello leutzuro
my first attempt of creating this indicator
pattern was created on 1 hr gbp-usd some time ago where entry was at Jan20 ( not gartley way since i still cant program this properly yet)
trendlines are drawn automatically
This is not 100% Gartley maybe not even 60% but it worked that day i am not good at programming and trying to fix it by whatever knowledge i have
i dont event know how to calculate distance between the points so i can start checking the retracements and right now it only give buy pattern.
thanks for your effort.i have an indicatore which is able to recognize butterfly pattern but it is wtitten for MT3.i attach it.perhaps it helps you to complete you work
pattern was created on 1 hr gbp-usd some time ago where entry was at Jan20 ( not gartley way since i still cant program this properly yet)
trendlines are drawn automatically
This is not 100% Gartley maybe not even 60% but it worked that day i am not good at programming and trying to fix it by whatever knowledge i have
i dont event know how to calculate distance between the points so i can start checking the retracements and right now it only give buy pattern.
and this is current at 5 min -- not taking any trades because i dont how will it work i will check the trendlines. The problem is 1st it only right now creates for buying no selling second fractal maybe wrong so dont know
Last edited by super-newbie; 02-01-2006 at 11:00 AM.
and this is current at 5 min -- not taking any trades because i dont how will it work i will check the trendlines. The problem is 1st it only right now creates for buying no selling second fractal maybe wrong so dont know
Funny thing or bug is that "D" will Keep Changing to down down and down untill a low is created above the "X" and upper trendline is the entry ..confusing for me too but as i said not a programmer maybe new system thanks for the code kamyar i will check what i can do with it
my first attempt of creating this indicator 
i am not good at programming and trying to fix it by whatever knowledge i have
Linear Mode
